HNC
Enter the era of perfection, performance & prestige.
Handpicked and matched branded crossover components were chosen for the HNC5.1 (5.25″) / HNC6.1 (6.5″) crossovers,
such as air core inductors and high grade polypropylene capacitors, mounted onto a custom designed pcb.
The results are optimized audio reproduction without interference of coloring the sound. In addition the accuracy of the 3.5 KHz /12 dB crossover point will appear more natural and balanced, while handling a cleaner slope of both high – & low pass of the midwoofers & the 1″ silk dome tweeters with angular direction.
The midwoofers were derived from the Reference series, using only premium parts such as nomex spiders and lightweight butylene surrounds for longetivity and efficiency, while the coated paper cone was chosen for its superior SQ performance.
All parts are mounted onto a cast aluminum basket, which offers both great ventilation and adequate excursion for the 1″ copper voice coil. A plus is that the basket comes with multiple mounting holes, making it a whole lot easier to adapt to specific vehicles. If it is not a reference series, it is as close as it gets with fitment for both 5.25″ and 6.5″ cutouts.
HN69 is a 3 way coaxial speaker with the intention to pack a punch with an attitude.
An oversized magnet which exceeds most 6×9’s keeps the 1.5″ voice coil in check. 2 XL diaphragms handles both the upper and lower high frequencies, while the smooth polypropylene cone with wide butylene rubber delivers the low end firmly. Coupled to an amplifier the HN69 starts to shine.
Product discontinued July 2018.
| Specifications: | HNC6.1 MIDRANGE | HNC5.1 MIDRANGE | HNC6.1 / HNC5.1 TWEETER | HN69 |
|---|
| Frequency Response: | 60 Hz ~ 5 KHz | 65 Hz ~ 5.5 KHz | 1.5 KHz ~ 20 KHz | 40 Hz ~ 20 KHz |
| Sensitivity: | 90.3 dB | 87.6 dB | 90 dB | 93 dB (2.83 v) |
| Nominal Impedance: | 4 Ohm | 4 Ohm | 4 Ohm | 4 Ohm |
| DC Resistance (RE): | 3.6 Ohm | 3.6 Ohm | 3.6 Ohm | 4 Ohm |
| Resonance Frequency (FS): | 59.7 Hz | 64.8 Hz | 1.3 KHz | 50 Hz |
| Power Handling: | 100 Watts | 100 Watts | 10 Watts | 150 Watts |
| QMS: | 4.494 | 3.571 | ||
| QES: | 0.402 | 0.446 | ||
| QTS: | 0.369 | 0.396 | ||
| VAS: | 10.87 L | 5.22 L | ||
| CMS: | 460 um/N | 490 um/N | ||
| MMS: | 15.24 g | 11.08 g | ||
| Voice Coil Diameter: | 1" | 1" | 1" | 1.5" |
| BL: | 7.18 | 6.104 | ||
| Magnet Weight: | 25 Oz | 20 Oz | 30 Oz | |
| XMAX: | 2 mm | 2 mm | 4 mm | |
| Displacement: | 0.57 L / 0.02 cu.ft | 0.28 L / 0.01 cu.ft | 0.84 L / 0.029 cu.ft |
*It is essential that our speakers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the speakers specs. Once the moving parts have been broken in, the performance of your speaker will increase.